Chapter 12 Maintenance; Introduction; Maintaining The Vehicle Computer - Motorola VC70N0 Product Reference Manual

Chapter 12 Maintenance

Introduction

This chapter includes instructions on cleaning and storing the vehicle computer, and provides troubleshooting
solutions for potential problems during vehicle computer operation.

Maintaining the Vehicle Computer

NOTE Whenever the VC70 is being replaced on a fork lift, ensure that the VC70 is compatible with the power
cable installed on the truck.
For trouble-free service, observe the following tips when using the vehicle computer:
•
Take care not to scratch the screen of the vehicle computer. When working with the vehicle computer, use
your finger tip or plastic-tipped pens intended for use with a touch-sensitive screen. Never use an actual pen
or pencil or other sharp object on the surface of the vehicle computer screen.
•
Although the vehicle computer is water and dust resistant, do not expose it to rain or moisture for an
extended period of time. In general, treat the vehicle computer as you would any other electronic device.
•
The screen of the vehicle computer is glass. Do not to drop the vehicle computer or subject it to strong
impact.
•
Protect the vehicle computer from temperature extremes.
•
Do not store or use the vehicle computer in any location that is extremely dusty, damp, or wet.
•
Use a soft lens cloth to clean the vehicle computer. If the surface of the vehicle computer screen becomes
soiled, clean it with a soft cloth moistened with a diluted window-cleaning solution.
•
Periodically check nuts and bolts to ensure they are tightened to the proper torque.
•
Ensure that you have spare screws when changing desiccant bags and SD cards.