Desk Mount - Motorola VC6000 Series Quick Reference Manual

Quick Reference Guide

Desk Mount

The mount allows the VC6000 series to be
easily placed on a desk and adjusted to a most
comfortable screen view position. A single
adjustment knob enables adjustment of both
upper and lower ball joints simultaneously. The
mount affixes to the VC6000 series using the
M4 screws, spring and flat washers and
bushings included inside the Hardware Kit.
Lift Trucks
Use RAM Mount RAM-246U and RAM-247U-25 Rail Clamp Base or
alternative to install the VC6090 on the front arm of the electric lift truck.
Secure the VC6090 RAM-246U with four RAM-246U Screws supplied
with the VC6090.
Install a RAM Clamp Base to one of the roll cage uprights on the electric
lift truck by securing the bolts around one of the uprights using the
correct mounting hardware.
An alternative RAM base may be used may be used to install

NOTE
the VC6090.
Horizontal Orientation — Square Upright Mounting Example
Upright
RAM-247U-25 Rail Clamp Base
(or alternative)
Avoid using horizontal mounting with arms longer than

NOTE
RAM-201U to minimize amplification to lift truck vibration.
RAM-246U
RAM-246U
(x4)
13
(x4)