Motorola VC70N0 Product Reference Manual page 27

2 - 4 VC70 Vehicle Computer Product Reference Guide
NOTE See the vehicle Owner's Manual for specific wiring information.
3. Connect the yellow wire to the vehicle's ignition or key switch if such is used. If you do not plan on using the
Ignition Sense feature, connect the yellow wire directly to the vehicle's battery positive terminal.
4. Ensure the wiring connections created are sufficiently insulated from each other.
5. Re-connect the vehicle battery.
6. Connect the power cable connector into the vehicle computer's Power port. Align the keyway on the power
connector with the notch on the vehicle computer's power port.
7. If the power supply is mounted remotely from the VC70, use 25-159549-01 extender cable to connect
between the power supply and the VC70.
8. Secure the power cables on both sides of the power supply with cable ties as close as possible to the
connectors.
The VC70 display can be blanked when the vehicle is moving to eliminate driver distraction for safety
considerations (see
To recover from display lock:
Press and hold on touch screen (more than 1 second).
1.
Remove your finger from the screen to resume operation.
2.
Terminal locking feature on page 11-6).