Motorola VC70N0 Product Reference Manual page 155

3
Scan a Scan Options bar code.
7.
Scan Prefix data Suffix bar code.
8.
Prefix data Suffix
Scan Enter bar Code
9.
Load 7.3.146 or greater of the Wavelink Emulation Software for the VC70N0 to your PC.
10.
From the VC70 Desktop, Tap
11.
TelnetCE Client launches on the VC70 and displays the Scanner Selection notification. Tap
12.
with "
No host connection
On the black screen, tap
13.
TelnetCE Client shows the following notification: "
14.
". Tap
Host Profile? Yes
Enter the following Host Profile information:
15.
•
Indicates the name of the host profile. Usually, this is the name or alias of the host system with which
Alias:
the VC70 creates a Telnet session.
•
Indicates the type of emulation that the host system uses. Available Options: <IBM-5251-11>
Emulation:
<IBM-3278-2> <IBM-3279-2> <IBM-3279-2E> <VT100> <VT220> <HP>. Default: <IBM-5251-11>
•
Indicates the IP address or host name of the host system. Possible Values: Valid IP address of the
Address:
running terminal emulation or host name.
•
Indicates the TCP port on which the host system is listening for Telnet connections. Possible Values: 0 -
Port:
65535. Default: 23 for Telnet server.
•
Secure Shell (SSH) is a cryptographic network protocol for secure data communication. Check the
box if required.
encryption
> Programs > TelnetCE
" indication shows.
Options > Connect Session 1
No Host Profiles have been configured. Would you like to add a
to continue.
TelnetCE Configuration 5 - 39
Scan Options
to start TelnetCE.
.
Enter
; a black screen
No
Use SSH