Installing A Stubby Antenna - Motorola VC70N0 Product Reference Manual

2 - 26 VC70 Vehicle Computer Product Reference Guide

Installing a Stubby Antenna

NOTE Symbol recommends using the Laird Technologies™ antenna, model number: WTS2450-RPSMA and Lih
Yeu Sheng Industries Antenna adapter part number: SMA94A3/1-SRMR or equivalent.
IMPORTANT The stubby antenna
To install an external antenna: stubby antenna
Lift the Antenna Connector cap on top of the vehicle computer.
1.
Screw the Antenna adapter onto the Antenna Connector. Torque to 5 ± 0.5 kgf/cm (4.3 ± 0.4 in-lbs).
2.
Screw the Antenna onto the Antenna adapter.
3.
Fasten the Ring at the base of the Antenna to cover as much threads as possible.
4.
Antenna
Connector Cap
Antenna Installation Example
Figure 2-28
must only be used with BSP software version 34.11 and above.
Stubby Antenna (WTS2450-RPSMA)
3
4
Ring
Antenna adapter (SMA94A3/1-SRMR)
1
2
Antenna Connector