Chapter 10 Staging And Provisioning; Introduction; Msp 3 Agent - Motorola VC70N0 Product Reference Manual

Chapter 10 Staging and Provisioning

Introduction

The Mobility Services Platform (MSP) 3 Client Software is a set of software components that come pre-installed on
the VC70. This integrated software service provides support for your MSP application, including server software,
and mobile client software.
Refer to the Mobility Services Platform 3.2 User's Guide, p/n 72E-100158-06, for instructions for using the Rapid
Deployment MSP 3 Agent clients.
NOTE Rapid deployment client is supported with all scanners that communicate with SSI (serial SSI or Wireless
SSI) with the VC70.

MSP 3 Agent

The MSP 3 Agent provides MSP 3 Provisioning functionality and Control functionality when used with MSP 3.2
Control Edition.
MSP client pre-requisites:
The device is connected over WLAN or over wired LAN, and receives IP address.
1.
External scanner is connected to provide "Image Update" info scanning option.
2.
Barcode image is available.
3.
After all pre-requisites are applied, the MSP client is activated using
menu.
Once the device had acquired the IP address and Rapid Deployment client scanned the provided bar code:
The MSP Client contacts the MSP server.
1.
The MSP server downloads required files for update to the required location on the device (Micro SD card or
2.
other).
The MSP client activates update process.
3.
The update process normally performs a special sort of boot, followed by flashing of the downloaded files.
4.
Programs > Rapid Deployment Client