Motorola VC70N0 Product Reference Manual page 109

Tap until you return to
11. Back
From the screen, tap
12. Profile0
Keep tapping
13. Back, Exit
On the DataWedge main screen, tap
Ready to Capture Window
Figure 4-48
Aim the scanner at a bar code and press the scan trigger. The bar code data appears in the DataWedge
14.
Demonstration window.
DataWedge Demonstration Window
Figure 4-49
screen
Profile0 .
Input > Serial > COM9: > Enabled.
and to return to DataWedge main screen.
OK
to show
Running
DataWedge Scanner Connection 4 - 23
and verify that
Yes Status: Ready
.