To Remove The Ceramic Side Walls - Valor 961 Installation And Owner's Manual

INSTALLER GUIDE
Figure 39. Window removal
17.9 To remove the fuel effect.
All of the fuel effect components except the front coal and ceramic walls can be
removed by simply removing the window assembly as in this section 17.8. If the front
coal or ceramic walls are to be replaced it will be necessary to remove the window
mounting frame and window assembly as in 17.7.
1. Remove the fuel effect in the reverse order to that shown for fitting in the ceramic
guide. The ceramic fuel effect may cause staining / discolouration to decorative
surfaces. It is therefore advisable to protect decorative surfaces.
2. Replace in the reverse order.

17.10 To remove the ceramic side walls.

1. Remove window mounting frame and window assembly as in section 17.7
2. Carefully slide the ceramic side walls forward to remove.
3. Carefully slide the ceramic rear wall upward to remove.
4. Replace in the reverse order.
©
Baxi Heating U.K. Limited 2008.
Page 37