Table of Contents
Advertisement
P A R T 1 2 : C E R A M I C C O A L S & W A L L S I N S T A L L A T I O N
Figure 36 Ceramic rear wall
installation
Figure 38 Rear base coal
installation
12.1 With its feather edge at the top, place the ceramic rear wall into the
channel at the back of the fire box.. Push the wall flat against the rear of the fire
box. (See figure 36) .
Figure 37 Front coal
installation
Figure 39 Ceramic side
walls
12.2 Place the two halves of the front base coal in
the burner compartment so that they rest on the
ledges at the sides and front. Pull the coals forward
so that they are immediately behind the front rim of
the burner compartment (See figure 37).
12.3 Place the rear base coal in the burner
compartment behind the front coal. Its rear face
should touch the rear ceramic wall (See figure 38).
12.4 The ceramic side walls are marked at the rear
bottom corners "L" (Left side) & "R" (Right side).
Place the side walls against the sides of the fire box
and in the recesses at the sides of the base coals. The
markings "L" & "R" should be at the at the back
bottom corners and facing to the centre of the back
of the firebox (See figure 39).
24
Advertisement
Table of Contents
