Maintenance; Battery Replacement; Regular Maintenance; Servicing - Valor 961 Installation And Owner's Manual

Battery replacement.

To replace the battery remove the bottom
front cover casting.
Fit the new battery firmly to the
connections on the ignition block (See figure
6).

Regular maintenance.

In order to achieve and maintain high levels of
personal safety and performance efficiency, it
is essential that the opening at the back of the
fire and the flue are kept clear of any form of
obstruction. It is possible that deposits of
mortar or soot could fall and accumulate
causing the flue to be blocked or restricted
and so preventing proper clearance of dangerous exhaust fumes.
In the United Kingdom it is the law that a landlord must have any gas appliance, flue
and pipework which is situated in a tenant's premises checked for safety at least
every twelve months by a competent person (In the U.K, a CORGI registered
installer).
We recommend that all gas appliances and their flues, wherever situated, are
checked annually.
When fitting replacement parts it is important that only approved parts are
used for maximum safety.

Servicing.

IMPORTANT
To help us quickly help you, please try to have the following information
available before you contact us:
Type of fire.
Model/Name.
Serial Number.
You will also be asked for the fault, problem or request plus your Post Code.
If you wish to replace any of the ceramic fuel effect pieces, spare parts are available
nationwide via the 'interpart stockist network'. For your local stockist consult Yellow
pages under Central Heating.
©
Baxi Heating U.K. Limited 2008.

OWNER GUIDE

MAINTENANCE

Page 52
Figure 6. Battery fitting