Installer Guide; Safety; Accessories - Valor 961 Installation And Owner's Manual

Inset live fuel effect gas fire incorporating the fireslide control fitted with one of the following fascia: aurora, solaris or lunar
Table of Contents

Advertisement

Before continuing any further with the installation of this appliance please read the
following guide to manual handling.
The lifting weight (kg) of this appliance is as below:
Model
Solaris
Lunar
Aurora
One person should be sufficient to lift the fire. If for any reason this weight is
considered too heavy then obtain assistance.
When lifting always keep your back straight. Bend your legs and not your back.
Avoid twisting at the waist. It is better to reposition your feet.
Avoid upper body/top heavy bending. Do not lean forward or sideways whilst
handling the fire.
Always grip with the palm of the hand. Do not use the tips of fingers for support.
Always keep the fire as close to the body as possible. This will minimise the
cantilever action.
Use gloves to provide additional grip.
Always use assistance if required.
This appliance can be fitted to a conventional precast flue system when using the
05654K1 spacer kit.
Note: When set to its minimum depth (approximately 170mm including the foam seal)
the spacer frame is suitable for the shallowest of precast flues (approximately 65mm
deep).
©
Baxi Heating U.K. Limited 2008.

INSTALLER GUIDE

1. SAFETY

Installer
Heat Engine
8.64
8.64
8.64

2. ACCESSORIES

Page 6
Firefront
13.24
12.47
12.47
Combined Weight
21.89
21.11
21.11

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents