Holding A Call (Using Exclusive Call Hold) - NEC UNIVERGE DT830G(DG) User Manual

TO RETRIEVE THE HELD
CALL
Following explains how to retrieve the held call.
1. While holding a call,
Line key that is placed on hold flashes green.
→
HOLD
11:00 AM SUN 1 JUN 2014
2. Press Line key that is placed on
hold.
Line key lamp lights green. →
11:00 AM SUN 1 JUN 2014
MIC Mute
3. Lift the handset and return to the
held call.
It is possible to retrieve a call on hold from another
terminal that has the same Line key flashing red.
IF UNANSWERED
After predetermined time, Automatic Recall
is initiated and the user hears Automatic
Recall ringer tone. Default time is one
minute.
Starting time to ring Automatic Recall is set
by system data setting at initial installation.
For details, please contact the system
administrator.
HOLDING A CALL (USING
EXCLUSIVE CALL HOLD)
TO HOLD
201
201
69
FEATURE OPERATION
This feature allows a terminal user to place a call
on Hold and to exclude all other station users from
retrieving the held call.
Following explains to hold the call in progress.
1. While a call in progress,
Line key that is used during a call lights green.
→
Line key on the other terminals lights red. →
11:00 AM SUN 1 JUN 2014
MIC Mute
2. Press feature key.
Feature key lamp lights red. →
3. Press Hold key.
Line key that is placed on hold flashes green.
→
Line key on the other terminals lights red. →
Feature key lamp goes off. →
HOLD
11:00 AM SUN 1 JUN 2014
4. Replace the handset.
201
201