To Backup Or Restore The Setting Data Of Terminal - NEC UNIVERGE DT830G(DG) User Manual

TO BACKUP OR RESTORE
THE SETTING DATA OF
TERMINAL
This section explains how to make a backup of the
setting data which has been entered in the terminal
to FTP/TFTP server. The data in FTP/TFTP server
can be also restored to the terminal.
When downloading these files, the terminal
needs to be connected to the network that
has FTP or TFTP server.
For details about FTP/TFTP service, please
contact the system administrator.
TO BACKUP THE SETTING
DATA OF TERMINAL
1. Press key to display the Menu
Screen.
2. Select "Setting".
Highlight an item by using
.
3. Select " Data Backup/Restore".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
, and press
, and press
57
4. Select " Protocol".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
5. Select a Protocol type of the server
which stores the Backup file.
Select one of the following operations.
• Highlight an item by using
or Soft key (OK).
• Press or
key (OK).
The display goes back to the [Backup/
Restore] screen.
6. According to the selection in
[Protocol] screen, proceed to the
following steps below.
• When " FTP" is selected here, go to
Step 7.
• When " TFTP" is selected here, go to
Step 15.
7. Select " FTP Settings".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
TERMINAL SETUP
, and press
, and press
, and press or Soft
, and press