NEC UNIVERGE DT830G(DG) User Manual page 13

NO. NAME
(2)
Exit key
(3) Speaker
(4) Dial keypad
(5)
Hold key
(6)
Transfer key
(7)
Speaker key (with light)
(8)
Cursor key
Redial
(9)
Menu key
(10)
Mic key (with light)
Mic
(11)
Feature key (with light)
(12)
Answer key (with light)
(13)
Recall key
(14) Programmable keys (with light) These keys can be programmed as Flexible line key/Programmable
(15)
(16)
Help key
(17) USB Port (Back)
(18) LCD
To exit the Menu or Help mode and go back to the time display.
Originating a call with handsfree.
Dial the called party number or feature access code.
To place a call on hold.
Allows the terminal user to transfer established calls to another ter-
minal, without attendant assistance.
To control the built-in speaker which can be used for handsfree di-
aling or monitoring.
Enter key
This terminal has Shortcut Menu for frequently-used features.
Use this key to display the Shortcut Menu and determine the
selected item in the menu. Also, this key is used as cursor-
movement key on the local menu of the terminal.
Volume (UP/DOWN) key
Used to adjust speaker/receiver volume, and ringer volume.
Right key (Directory)
Press this key to open the Directory menu.
Left key (Redial)
Press this key to activate Redial feature. Press Redial and scroll
back through numbers that have been dialed. When the desired
number is displayed, press
To access the menu of terminal.
To respond handsfree. LED lights during speakerphone operation.
To activate features such as terminal setup and to program One-
Touch Speed Calling keys.
When LED on this key is lit, press this key to answer the incoming
call.
To finish a call and hear the dial tone to make an another call.
feature key by system administrator.
Soft keys The feature name is shown at the bottom of the LCD. The appropriate
feature key is displayed on the screen according to the call handling
process.
To call up explanations of the Soft keys on the LCD.
To connect USB Device for charging etc.
To display date or dialed number etc.
6
INTRODUCTION
FUNCTION
or to activate dialing.