To Set A Language - NEC UNIVERGE DT830G(DG) User Manual

5. Select " Font Size".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
6. Select "Font Size".
Select one of the following operations.
• Highlight an item by using
or Soft key (OK).
• Press or
key (OK).
, and press
, and press
, and press or Soft

TO SET A LANGUAGE

The language is set by system data setting
at initial installation.
Therefore, it is not required to change the
language on the terminal from default setting
( Automatic). For details, please contact
the system administrator.
48
TERMINAL SETUP