Appendix B Input Characters; How To Input Characters - NEC UNIVERGE DT830G(DG) User Manual

APPENDIX B INPUT CHARACTERS

HOW TO INPUT CHARACTERS

SYSTEM/STATION SPEED DIALING FEATURE
Press the dial key to display the character. The character will be changed by repeatedly pressing the dial. After
displaying the desired character, press
Example: When inputting with "MARY SMITH",
6# 2# 777# 999# 0# 7777# 6# 444# 8# 44#
M A R Y
The following two input mode can be specified.
• ABC: English input mode.
• NUM: Number input mode.
Input mode switches over by pressing the Soft key repeatedly ("ABC" → "NUM" → "ABC").
Up to 4 characters can be entered for keyword searching.
Up to 16 characters can be registered for each name.
Up to 30 digits can be registered for each dial number.
(access code: up to 4 digits, called number: up to 26 digits)
The default setting is English input mode.
Please refer to
character that can be entered.
MENU CONTENTS (PASSWORD INPUT)
The characters that can be input vary depending on the menu.
Example: Password input screen.
or
S M I T
"TABLE OF INPUT CHARACTERS" on page 123
(1) Input Mode
APPENDIX B INPUT CHARACTERS
.
H
for the
122