1.
Security lamp lights red and
"Security Lock" is displayed.
(1) Security lamp lights red while being set
Security Mode.
(2) Security button.
2.
Lift the handset.
"Dial Emergency Number Only." is displayed.
When you press Speaker key, password
entry screen is displayed. The emergency
call screen is displayed by lifting the handset.
Emergency call cannot be made with
Speaker key.
3.
Dial the emergency number.
Example: Dial "911".
Maximum 3 emergency numbers are set by
system data setting at initial installation. For
details, please contact the system
administrator.
The user can make a call to only the
predetermined number. When numbers
other than the predetermined emergency
number are dialed, the following message
appears.
After a few seconds, the display goes back
to emergency call screen.
4.
The call is originated to the dialed
emergency number.
You will receive a ring back tone.
11:00 AM SUN 1 JUN 2014
Recall
5.
After a conversation, replace the
handset.
After making a call to emergency number,
security lock is released, since there is a
case the terminal receives a call back from
the emergency number.
The security lock will be set after 60 minutes
from releasing Security Mode.
107
FEATURE OPERATION
911
VOICE
CB
>>>>