To Hold A Call; To Place A Call On Exclusive Hold - NEC DT730 User Manual

TO HOLD A CALL

Press key. Held line wink flashes.
HOLD
HOLD
4:26 PM TUE 13 APR 2004
TIP: If held line appears on other DT Series stations,
the associated LED flashes red slowly.
To Retrieve
Lift handset or press
Press held line. Use handset to converse.
TIP: Any station with this line appearance can retrieve
the call.
If unanswered
After preprogrammed time, Automatic Recall is initi-
ated.
Visual and audible signal (rapid flash and ring
burst) is sent to station that placed call on hold.
Held station
number
2001
key.
Speaker
Note: Hold shows as a flashing green LED on your
phone. The same line on other phones shows as a
flashing red LED. Recall shows as a flashing
green LED on your phone and flashing red LED on
other phones with the same line.
TO PLACE A CALL ON EXCLUSIVE
HOLD
Press key twice. Line appearance indi-
HOLD
cates interrupted wink.
E_HOLD
4:26 PM
TIP: If held line appears on other DT Series stations,
LED remains steadily lit red.
To Retrieve
Lift handset or press
Press held line. Use handset to converse.
TIP: Only the DT Series that set Exclusive Hold option
can retrieve the call.
78
Held station
number
2001
TUE 13 APR 2004
key.
Speaker