To Enable/Disable Rtp Alarm - NEC UNIVERGE DT830G(DG) User Manual

TO ENABLE/DISABLE RTP
ALARM
Following explains how to enable/disable RTP
Alarm. The RTP Alarm tone allows the terminal
user to be notified that the voice packet is not
received in a certain period of time because of the
network delay etc.
1. Press key to display the Menu
Screen.
2. Select "Setting".
Highlight an item by using
.
3. Select " User Setting".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
4. Select " Talk".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
, and press
, and press
, and press
40
5. Select " RTP Alarm".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
6. Select whether to ring the RTP
Alarm.
Select one of the following operations.
• Highlight an item by using
or Soft key (OK).
• Press - , and press
(OK).
If the " Automatic" is selected, this feature
is activated in accordance with the system
data setting. If it is not specified by the
system data this feature is in effect (RTP
Alarm = 'ON'). For details, please contact the
system administrator.
TERMINAL SETUP
, and press
, and press
or Soft key