To Enable/Disable Volume Level Display - NEC UNIVERGE DT830G(DG) User Manual

TO ENABLE/DISABLE
VOLUME LEVEL DISPLAY
Determines whether or not to display the following
volume levels: handset receiver volume, speaker
volume, ringer tone volume and LCD contrast
volume.
1. Press key to display the Menu
Screen.
2. Select "Setting".
Highlight an item by using
.
3. Select " User Setting".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
4. Select " Display".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
, and press
, and press
, and press
43
5. Select " Local Volume".
Select one of the following operations.
• Highlight an item by using
, or Soft key (OK).
• Press .
6. Select whether to display the
volume level.
Select one of the following operations.
• Highlight an item by using
or Soft key (OK).
• Press - , and press
(OK).
If it is set to " Automatic", the "
is applied.
TERMINAL SETUP
, and press
, and press
or Soft key
Enable"