Dial Intercom - NEC UNIVERGE DT830G(DG) User Manual

DIAL INTERCOM

Dial Intercom comprises up to 10 terminals that
can call each other using a dedicated Dial Intercom
feature key with abbreviated dialing. Dial Intercom
calls can be voice announce with ringing calls.
The feature key is set by system data setting
at initial installation. For details, please
contact the system administrator.
TO INITIATE
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Press Dial Intercom feature key.
Dial Intercom feature key lamp lights green.
→
ICM
11:00 AM SUN 1 JUN 2014
Recall PICK
3. Dial desired intercom terminal
number ( -
4. Press .
Change to ring tone signal.
Tone burst is sent.
TO ANSWER
1. While hearing ringing tone,
Dial Intercom feature key lamp flashes green.
→
Tone burst or ring tone is heard.
ICM
11:00 AM SUN 1 JUN 2014
MIC DIR
2. Press Dial Intercom feature key.
Dial Intercom feature key lamp lights green.
→
200
>>>>
).
201
HIST. >>>>
3. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
98
FEATURE OPERATION