Whisper Page - NEC UNIVERGE DT830G(DG) User Manual

3. Dial the number corresponding to
desired message.
Message Patterns
DIAL
0 IN: BACK
1 OUT: BACK
2 AWAY: BACK
3 VACATION
• Press or
IN:BACK
11:00 AM SUN 1 JUN 2014
Recall PICK
• Press or
date (Example: for June, 8, enter
"0608").
AWAY:BACK
11:00 AM SUN 1 JUN 2014
Recall PICK
4. Press Speaker key.
Speaker key lamp goes off. →
Return Message Schedule is registered.
TO CANCEL
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
cancel code.
3. Press Speaker key.
Speaker key lamp goes off. →
MESSAGE
HH: MM
HH: MM
MM: DD
MM: DD
and dial desired time.
>>>>
and dial the month and
>>>>

WHISPER PAGE

This feature allows a secretary to interrupt the boss
in a private way. By pressing a feature key or
dialing an access code, the secretary terminal can
interrupt the conversation between the boss and
another party. When the conversation is
interrupted, the boss can hear the secretary but the
other party is unaware of the voice override.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO SET
Whisper Page has two kinds of operations.
PATTERN 1
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial desired extension number.
You will receive a busy tone.
BUSY
11:00 AM SUN 1 JUN 2014
CB
3. Press Transfer key.
11:00 AM SUN 1 JUN 2014
CB
4. Dial Whisper Page access code or
press Whisper Page feature key.
You will receive a service set tone.
11:00 AM SUN 1 JUN 2014
Recall
102
FEATURE OPERATION
201
CW >>>>
CW >>>>
201
VOICE CB >>>>