3.
Push the Tilt Legs upward until they snap into place.
4.
Lift both ends of Tilt Legs until they come together.
CONNECTING LAN CABLE
Connect LAN cable to the terminal following steps.
ILPA-R unit is required when PoE Hub supports NEC Proprietary
Protocol (The ILPA-R UNIT converts IEEE802.3af to NEC Proprietary
Protocol). When ILPA-R UNIT is used, 1000BASE-T is not available.
For details, please contact the system administrator.
1.
Plug the power cable into the AC adapter connector when power is supplied with AC
adapter. This step is not required when PoE hub is used.
c
g
f
d
h
B
13
e
E
C
G
F
D
H
b
a
A
INTRODUCTION