Privacy Release; Return Message Schedule - NEC UNIVERGE DT830G(DG) User Manual

PRIVACY RELEASE

A terminal is engaged in a conversation, and
allows another terminal to enter the call in
progress.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
1. Press Soft key (CONF) or
Conference feature key.
Line key lamp lights green. →
11:00 AM SUN 1 JUN 2014
MIC CONF
2. Another terminal with the same line
appearance presses that Line key.
CONF
MIC Mute
3. A three-way conference is
established.
CONF
11:00 AM SUN 1 JUN 2014
MIC Mute
201
Recall
201 301
Mary
201 301
RETURN MESSAGE
SCHEDULE
This feature allows terminal user to register a
return schedule when leaving the office and have
the schedule display on the calling terminal LCD.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system
administrator.
TO SET
1. Press Speaker key.
You will receive a dial tone.
Speaker key lamp lights red. →
2. Dial Return Message Schedule
access code or press Return
Message Schedule feature key.
11:00 AM SUN 1 JUN 2014
Recall
101
FEATURE OPERATION
PICK >>>>