Table of Contents
Advertisement
20.
Press Soft key (Exit).
The display goes back to the [Backup/
Restore] screen.
When the backup process ends in failure,
"Upload Failed!" is displayed on the LCD.
Check to see the following points and retry
backup.
CHECK POINTS
Check whether IP address of
FTP/TFTP server is correct
or not.
Check whether the power to
FTP/TFTP server and net-
work equipment are ON or
not.
Check whether the LAN ca-
ble is connected securely.
If the retry of uploading fails many times, the
terminal may be in failure. For details, please
contact the system administrator.
TO RESTORE THE SETTING
DATA OF TERMINAL
1.
Press
key to display the Menu
Screen.
2.
Select "Setting".
Highlight an item by using
.
ACTIONS
Set the proper IP
address of FTP/
TFTP server.
Turn on the pow-
er.
Reconnect the
cable securely.
, and press
60
3.
Select "
Data Backup/Restore".
Select one of the following operations.
•
Highlight an item by using
,
or Soft key (OK).
•
Press
.
4.
Select "
Protocol".
Select one of the following operations.
•
Highlight an item by using
,
or Soft key (OK).
•
Press
.
5.
Select a Protocol type of the server
which stores the Backup file.
Select one of the following operations.
•
Highlight an item by using
or Soft key (OK).
•
Press
or
key (OK).
The display goes back to the [Backup/
Restore] screen.
6.
According to the selection in
[Protocol] screen, proceed to the
following steps below.
•
When "
FTP" is selected here, go to
Step 7
•
When "
TFTP" is selected here, go to
Step 15
TERMINAL SETUP
, and press
, and press
, and press
, and press
or Soft
- Quick Links:
- Voice Mail
Hide quick links:
Advertisement
Table of Contents
