NEC UNIVERGE DT830G(DG) User Manual page 142

NO. KEY/LAMP
(2) Path Key (Orange/Green) Switch over the Wired Telephone Mode or Mobile Phone Mode. And changing
The feature key is set by system data setting at initial installation. For
details, please contact the system administrator.
PHONE SCREEN AND STATUS ICON
The following is an example display of Phone Screen and Status Icon.
STATUS ICON DISPLAY
The LCD displays icon in the icon information area when BCA option unit is used.
ICON
This icon appears when BCA option is mounted on the terminal and connected with Smart Device
through Bluetooth.
LCD 3-LINE DISPLAY
Displays LCD information sent from the communication server.
USING BLUETOOTH FUNCTION
In order to use the BCA feature, please make sure your smart device is designed to operate on HFP (Hands-Free
Profile), A2DP (Advanced Audio Distribution Profile) and AVRCP (Audio/Video Remote Control Profile).
Also, to make a Bluetooth connection using the terminal with BCA, the terminal must be connected with the
communication server.
The status of Bluetooth function and connection status of the smart device can monitor by Connect key lamp. The
following table shows the lamp indication of each connection status.
Lamp Indication
Off
Red lamp on
Red and green lamp lights with one
second interval
the smart device type.
(1) Status Icon Display
(2) LCD 3-Line Display (Bottom Line:Soft key)
DESCRIPTION
Bluetooth function is not activated.
Bluetooth function is activated.
Terminal and BCA option unit is in pairing mode with smart device.
135
APPENDIX D PAIRING WITH SMART DEVICE
FUNCTION
Function/Connection Status