NEC UNIVERGE DT830G(DG) User Manual page 63

21. Press Soft key (Exec).
Downloading is started.
After the downloading process is complete,
the display changes as follows.
22. Press Soft key (Exit).
The display goes back to the [Download
Menu] screen.
When the downloading process ends in
failure, "Downloading Failed!" is displayed on
the LCD. Check to see the following points
and retry download.
CHECK POINTS
Check whether the down-
load file is placed in the
folder of the server or not.
Check if the file name you
entered is match with that
stored in FTP/TFTP server.
Check whether IP address
of FTP/TFTP server is cor-
rect or not.
Check whether the power
to FTP/TFTP server and
network equipment is ON
or not.
Check whether the LAN ca-
ble is connected securely.
If the retry of downloading fails many times,
the terminal may be in failure. For details,
please contact the system administrator.
56
TERMINAL SETUP
ACTIONS
Place the down-
load file in the
specified folder of
the server.
Enter the correct
file name which is
stored in FTP/
TFTP server.
Set the proper IP
address of FTP/
TFTP server.
Turn on the power.
Reconnect the ca-
ble securely.