NEC UNIVERGE DT830G(DG) User Manual page 136

2. Insert a USB Device connector into the USB Port.
Be sure the orientation of the plug, and push the USB Device until it stops.
3. The USB Device is now connected.
Before connecting USB Devices, connect the terminal to the system.
Confirm that the connected USB Device is correctly recognized.
Procedure to verify it depends on the type of the USB Device. For details,
refer to the users' manuals of the USB Device.
This terminal has over current detection function for USB Device. For
details, refer to "ABOUT TERMINAL" on page
When an over current is detected, the icon indicating abnormal condition
of USB Device will appear on the LCD. For details, refer to
WHEN A USB DEVICE IS CONNECTED" on page
1.
"DISPLAY
130.
129
APPENDIX C USB PORT