NEC UNIVERGE DT830G(DG) User Manual page 145

MODE
Wired Telephone Mode
Mobile Phone Mode
SWITCH THE MODE OF TERMINAL (WIRED TELEPHONE MODE/ MOBILE
PHONE MODE)
1. Press Path key when the smart device is idle or receiving an incoming call.
2. The mode is changed. (Wired Telephone mode or Mobile Phone mode)
TO SET SMART DEVICE TYPE BY PATH KEY
This section explains how to set the type of smart device to be connected to the terminal by using Path key. The
following smart device types can be set to the terminal.
• Type1: iPhone, iPad
• Type2: Other Smart Device
1. Long press Path key, when the terminal is idle.
2. After the smart device type is set, confirmation beep is heard as follows.
Type1
Once (iPhone, iPad)
Type2
Twice (Other Smart Device)
For the detail of the smart device vender and model that has been verified
the proper operation, please contact the system administrator.
iPhone and iPad are registered trademarks of Apple Inc.
LAMP COLOR
Orange
Green
138
APPENDIX D PAIRING WITH SMART DEVICE
LAMP INDICATION
(Flashing interval is
shown in seconds)
Flashing
(0.125 ON-0.125
OFF-0.125 ON-0.625
OFF)
Flashing
(0.5 ON-0.5 OFF)
Flashing
(0.125 ON-0.125 OFF)
Lighting
Flashing
(0.125 ON-0.125 OFF)
TERMINAL STAUS
Smart device is receiving
an incoming call.
Smart device is originating
a call or talking.
Talking with smart device.
Smart device is idle or
ringing by communication
server.
Smart device is talking
with the caller through
communication server.