Display When A Usb Device Is Connected; To Take The Usb Port Cover Off - NEC UNIVERGE DT830G(DG) User Manual

DISPLAY WHEN A USB DEVICE IS CONNECTED

When a USB Device is connected, the USB connection is displayed in "Status Icon Display".
When an over current of USB Device is detected,
If an over current is detected, power supply to the USB Port is stopped.
To restart power supply, remove the USB Device and resetting the
terminal according to the following procedure.
• Disconnect and reconnect the LAN cable when the terminal
receives the power supply from the PoE Hub.
• After removing the LAN cable, disconnect and reconnect the AC
adapter cable when the AC adapter is used.
When the LAN cable is removed or connected, be careful not to confuse
the cable from the PC side and the LAN.
For details about the display, refer to
REGISTERED)" on page

TO TAKE THE USB PORT COVER OFF

The USB Port Cover can be removed.
1. Open the USB Port Cover.
" STARTING UP TERMINAL (WHEN EXTERNAL APPLICATION IS NOT
22.
and will appear alternately at intervals of one second.
130
APPENDIX C USB PORT