Call Forwarding - Destination; Cid (Caller Id) Call Display - NEC UNIVERGE SV9300 Series User Manual

CALL FORWARDING -
DESTINATION
This feature allows a station user to set Call Forwarding - All
Calls from another station within the system.
The feature access code/feature key is set by
system data setting at initial installation. For
details, please contact the system administrator.
TO SET CALL FORWARDING -
DESTINATION
1.
Press Speaker key.
Speaker key lamp lights red.
Line key lamp lights green.
2.
Dial Call Forwarding – Destination feature access
code or press Call Forwarding - Destination
feature key.
You will receive a special dial tone.
3.
Dial station number to be forwarded to this line.
Wait for service set tone.
4.
Press Speaker key.
Speaker key lamp goes off.
Line key lamp goes off.
TO CANCEL CALL FORWARDING -
DESTINATION
1.
Press Speaker key.
Speaker key lamp lights red.
Line key lamp lights green.
2.
Dial Call Forwarding – Destination Cancel feature
access code or press Call Forwarding –
Destination Cancel feature key.
3.
Dial station number to cancel.
4.
Press Speaker key.
Speaker key lamp goes off.
Line key lamp goes off.
FEATURE OPERATION

CID (CALLER ID) CALL DISPLAY

Without answering incoming calls or held calls that terminate to
the Line keys of a terminal, the calling party's information can be
confirmed by the indications on the LCD.
The feature key is set by system data setting at
initial installation. For details, please contact the
system administrator.
TO DISPLAY CALLING PARTY
INFORMATION
1.
Press CID Call Display feature key.
Line key lamp lights red.
Calling Party information is displayed.
TO REDISPLAY CALLING PARTY
INFORMATION
2.
While on a call press CID Call Display feature key
to recall the Calling Party Information.
Calling Party information is displayed
61