performing a factory Reset on the XMC-1
The Factory Reset feature on the XMC-1 allows you restore all settings to their default factory
configuration.
Note: performing a factory Reset restores all current settings on your XMC-1 to their factory
default settings, but does NoT erase the internal configuration backup file stored on the XMC-1
- if one exists.
Note: A factory Reset is used to restore your XMC-1 to its factory default configuration. It is
NoT necessary to perform a factory Reset after performing a Restore Configuration. It is NoT
necessary to perform a factory Reset after performing an Update firmware - unless otherwise
noted in the instructions you receive with the update file or from Emotiva Technical support.
To perform a Factory Reset on your XMC-1:
•
Press the Menu button.
•
Use the Up/Down buttons to select Setup; press the Right button to enter the Setup menu.
•
Use the Up/Down buttons to select Advanced; press the Right button to enter the Advanced
Setup menu.
•
Use the Up/Down buttons to select Factory Reset; press the Right button to enter the
confirmation screen.
•
Use the Up button to confirm your choice; the confirmation box will change to "X".
•
Use the Left button to confirm the reset.
•
You will see a status message indicating that the Factory Reset is in progress, and another
message to confirm when it is completed.
•
You may exit the Setup Menu as soon as the "Done" status message appears.
Care and Maintenance
Page 89