Emotiva XMC-1 User Manual page 54

The XMC-1 Menu System
Restore Config
Selecting Restore Config instructs the XMC-1 to retrieve a stored copy of its configuration file and
apply the stored configuration. After selecting Restore Config you will be prompted to Confirm
your choice.
Note: If a UsB stick is inserted in the XMC-1, the configuration stored there will be used. If no
UsB stick is inserted, or no external configuration file is present, then the configuration that is
stored internally will be used.
Tuner Region
The Tuner Region setting is used to configure the tuner in the XMC-1 to comply with the correct
channel frequency spacing for your region. You may select either Americas or Europe/Asia.
Setup Lock
Setup Lock is used to prevent the XMC-1's configuration settings from being inadvertently
changed.
Selecting None will leave all configuration settings unlocked. This is the normal default
configuration.
Selecting Advanced locks the Setup Advanced Menu - which will then no longer appear on the
Setup Menu. This prevents anyone from inadvertently changing any settings on the Setup
Advanced Menu, which include resetting the XMC-1 to factory defaults.
Selecting All locks the entire Setup Menu.
Note: If you lock the entire setup Menu - by selecting All, or just the setup Advanced Menu - by
selecting Advanced, you will no longer have access to the setup Advanced Menu, which will
prevent you from changing the lock settings. This will prevent you from unlocking the menus.
If you find yourself in this situation, you may still access the setup Advanced Menu directly by
pressing the Menu button on the front panel WhIlE holDING DoWN ThE fRoNT pANEl ENTER
BUTToN.
Front Buttons
Check this box to disable all front panel controls.
Note: This feature is intended to prevent settings on the XMC-1 from being inadvertently
changed (and also acts as a "child lock"). If you accidentally become locked out of the XMC-1 by
disabling all controls, including the remote control, you can override this feature and access the
setup Advanced Menu by holDING ThE ENTER BUTToN DoWN WhIlE pREssING ThE MENU
BUTToN (both on the front panel). This will allow you to enter the setup Advanced Menu and
re-enable the controls.
Front IR Blaster
Use this check box to disable the front panel IR blaster.
Page 48