Emotiva XMC-1 User Manual page 49

setup | Triggers Menu
Setup
Triggers
(menu)
The setup Triggers Menu allows you to configure how the triggers on the XMC-1 operate.
The XMC-1 has four fully independent triggers, each one of which may be configured to activate
an associated piece of trigger-enabled equipment when specific conditions are met. For example,
you could configure the triggers to activate the amplifiers that power your main front speakers
whenever you play music, and the amplifier that powers your surrounds, and your powered
subwoofer, to only be activated when you're listening to a surround sound source.
The triggers on the XMC-1 are configured by checking various boxes in the Setup Triggers Menu.
All of the following options are available independently for each of the four triggers on the XMC-1.
For triggers associated with Zone 2, the trigger will be active whenever Zone 2 is On AND one of
the Inputs associated with that trigger is selected.
For triggers associated with the Main Zone, there is an additional condition that must be met. For
the Main Zone, each trigger must be associated with one or more Inputs AND also be associated
with one or more Speaker groups. The trigger will be active whenever the Main Zone is On, AND
one or more of the Inputs associated with that trigger is active, AND one or more of the Speaker
groups associated with that trigger is active.
Power
Each trigger must be configured to be active when the Main Zone, Zone 2, or both zones are On.
The trigger will only be active when at least one of the zones it is associated with are active. Under
Power, check the zones for which you want the trigger to be active.
The XMC-1 Menu System
Triggers
List
Power
Headphone
Speakers
Inputs
Page 43
Main
Zone
Zone 2
Override
Speakers
List
Inputs
List