Firmware Version - Emotiva XMC-1 User Manual

Information Menu
Information
(menu)
The XMC-1 Menu System
Friendly
Name
Network
MAC
Address
Firmware
Version
FP
Version
Kernel
Version
HDMI
Version
CPLD
Version
Page 34
The Information Menu gives you access
to information about the current Network
configuration of the XMC-1, shows the
versions of the currently installed firmware
modules, and allows you to see the XMC-1's
Friendly Name.
The information displayed on this screen is
configured from other screens in the Setup
Menu and cannot be changed from this
screen.
Friendly Name
The Friendly Name is used by various remote
control applications to identify the XMC-1
(the default is "XMC-1").
Network
The Network Address is the IP address
assigned to your XMC-1. If the XMC-1 is
configured to use DHCP, then this address is
set by your DHCP server; otherwise it may be
entered manually. A valid Network Address
is required to configure Dirac Live, and to
control the XMC-1 using a network attached
remote control. If your XMC-1 isn't connected
to a network this address may show as 0.0.0.0
(none).
MAC Address
This is the hardware address assigned to the
network interface on the XMC-1. This address
may be requested by some routers in order
to allow the XMC-1 to access the Internet.

Firmware Version

This is the current version of the main XMC-1
firmware installed on your XMC-1.