Emotiva XMC-1 User Manual page 53

setup | Advanced Menu
Setup
Advanced
(menu)
The XMC-1 Menu System
Factory
Reset
Backup
Con g
Restore
Con g
Tuner
Region
Setup
Lock
Front
Buttons
Front
IR Blaster
Front
IR In
Standby
Firmware
Update
The setup Advanced Menu
allows you to configure
Con rm
various system operating
preferences, including
selecting a Standby Mode,
and enabling various
Con rm
controls and remote
control inputs and outputs.
Firmware updates, and
resetting your XMC-1 to
Con rm
factory defaults, are also
initiated from this menu.
Factory Reset
Selecting Factory Reset
clears all user settings
and returns the XMC-1 to
its factory defaults. After
selecting Factory Reset you
will be prompted to Confirm
your choice. To do so, check
the confirmation box, then
use the Left arrow key to
confirm the action.
Backup Config
Selecting Backup Config
instructs the XMC-1 to save
a copy of its configuration
file. After selecting Backup
Config you will be prompted
to Confirm your choice.
Note: If a UsB stick is
inserted in the XMC-1,
the configuration will be
stored there. If no UsB
stick is inserted, then the
configuration will be stored
internally.
Con rm
Page 47