Emotiva XMC-1 User Manual page 86

Connecting the XMC-1
12. Mute Button
Press the Mute button to mute the audio output on the XMC-1; press it again to unmute the
audio.
13. On Button
Press the On button to switch the XMC-1 from Standby mode to On.
14. Volume Up and Volume Down Buttons
Use the Volume Up and Volume Down buttons to raise and lower the audio volume on the XMC-1.
Note: Audio level on the XMC-1 is controlled by an electronic digitally controlled analog ladder
network. When you change the Volume using the buttons on the remote control, the Volume
knob will not move.
15. Speaker Preset Button
Toggles between the speaker presets: Dirac Live, and the two manual presets, which will show the
names you have configured for them.
16. Loudness Button
Press this button to configure the Level Controls on the XMC-1 to act as a true Fletcher-Munsen
Loudness control; press it again to configure the XMC-1 Level Controls as a standard audio Volume
control.
17. Menu Button
Press this button enter the XMC-1 Menu system; press it again to close the Menu and return to
normal operation.
18. Zone 2 Input Button
Use the Zone 2 Input button to cycle between the available inputs for Zone 2.
Note: on the XMC-1, the Zone 2 input is selected independently from the main zone. ANy input
that is currently selected as the Main Zone Input can also be selected as the Zone 2 Input. If you
wish to set the Zone 2 Input to a different source than the main zone, you will be able to select
both ANAloG sources and 2 ChANNEl pCM DIGITAl soURCEs. you will NoT be able to select a
different digital surround sound or hDMI source for the Zone 2 Input that is different than what
is playing in the Main Zone.
19. Zone 2 Volume Button
Use these buttons to raise and lower the volume of the Zone 2 audio outputs.
Page 80