Emotiva XMC-1 User Manual page 4

The power cable for the XMC-1 should be unplugged from the outlet during severe electrical storms, or when
unused for a long period of time.
Only replace the fuses in the XMC-1 with fuses of proper value and voltage rating.
The XMC-1 should only be cleaned as directed in the manual. Avoid spraying liquids directly onto the XMC-1
and NEVER spray liquids into the vents. Care should be taken so that small objects do not fall into the inside
of the XMC-1.
You should seek service for your XMC-1 by qualified service personnel if any of the following occur:
!
1. The power-supply cord or the plug has been damaged.
2. Objects or liquid have fallen or spilled into the vents.
3. The XMC-1 has been exposed to rain.
4. The XMC-1 exhibits a marked change in performance.
5. The XMC-1 has been dropped, or its enclosure or chassis is damaged.
NoTE: To CoMplETEly DIsCoNNECT ThE XMC-1 fRoM ThE AC poWER MAINs, DIsCoNNECT ThE
AC poWER CoRD fRoM ThE AC RECEpTAClE.
NoTE: ThE XMC-1 AC poWER CoRD MUsT REMAIN READIly ACCEssIBlE AT All TIMEs.
CAUTION
CAUTION: TO REDUCE THE RISK
OF ELECTRICAL SHOCK, DO
NOT REMOVE COVER. NO USER
SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Electric service
equipment
Ground clamps
NEC - National Electrical Code
Ground clamp
Antenna lead-in wire
Antenna discharge unit
(NEC section 810-20)
Grounding conductors
(NEC section 810-20)
Power service grounding
electrode system
(NEC art 250, part H)