Emotiva XMC-1 User Manual page 36

This example will show you exactly how the process works, although it seems a lot more
complicated on paper than it does in real life. Once you have an XMC-1 in front of you in person,
you'll see how simple and intuitive the XMC-1 Menu System really is.
In this example we'll configure Trigger 1 to come on when the Main Zone Power is On and When
Zone 2 Power is On.
HDMI 1 Surround
A: HDMI 1 PCM 7.1
V: HDMI 1 1920x1080p/60 RGB 8bits
Tuner
Setup Triggers
Information
Preferences
Setup Triggers
HDMI CEC
Setup Triggers
The XMC-1 Menu System
Volume -35.0dB
48kHz 24bits
Trigger 1
Trigger 1
Trigger 2
Trigger 1
Trigger 4
Page 30
In normal operation the XMC-1 will usually
display the Information Screen.
Press the Menu button, which brings up the
Main Menu screen. The highlight shows that the
Setup Menu is already the active choice, and the
arrows show that we can move up to the Tuner
Menu or down to the Information Menu.
Press the Right arrow button to enter the Setup
Menu. Now the highlight shows that the active
choice is Triggers, and we can move up to the
Setup Preferences Menu or down to the Setup
Network Menu. Use the Right arrow button to
move to the Setup Triggers Menu.
Since we want to configure one of the Triggers,
use the Up, Down, and Right arrow buttons to
select the particular Trigger we want. At this
point the arrows show that we can move up or
down to select the Trigger we want to configure.
Since Trigger 1 is already the active choice, use
the Right arrow button to select it and enter
into the Trigger 1 section of the Setup Triggers
Menu.