Emotiva XMC-1 User Manual page 37

Speakers
Input HDMI 1
Power
Input
Power Main Zone
Headphone
Power Main Zone
Zone 2
Note: since, in our example, we wanted Trigger 1 to remain active when any combination of
Inputs and speakers was used, we left the Inputs and speakers check boxes set to their default
condition - which is "all checked".
Note: Whenever you use the left arrow button to exit a Menu screen, or use the other arrow
buttons to move around the Menu system, all changes you've made in any screen you leave are
automatically saved: check a box and it stays checked; uncheck a box and it stays unchecked;
change a value and it stays where you set it. you don't have to remember to save settings, or to
exit the Menu screen using the correct button. And, at any point, you can exit the Menu system
using the Menu button and all your settings will be saved.
Note: Before experimenting with new options or settings, we recommend that you save your
current configuration; that way you can discard your changes and return to it if you change
your mind. see Creating a Configuration Backup on page 86 for details.
Once you try the XMC-1's menu system for a few minutes, you'll realize how incredibly intuitive it
really is - and how easy it makes controlling the amazing power and flexibility of the XMC-1.
The XMC-1 Menu System
This time the highlight is showing us that the
active choice is to configure how Trigger 1
responds to each Input. Since this time the
default choice is not the one we want, use the
Down arrow button to move to Power, which is
the option we want.
Now the highlight is showing the choice we
want, so use the Right arrow button to select it
and move into that part of the menu.
As you can see, we're in the final menu screen
for configuring how Trigger 1 will respond to
Power conditions. All we have to do is use the
Up and Down arrow buttons to select Main
Zone, and then Zone 2. Then, for each of those,
use the Right arrow button to move to the
check box, the Up and Down arrow buttons
to check the box, and the Left arrow button
to move back to where we are. After we've
checked the box for both zones, we'll use the
Menu button to exit back to the Information
screen.
Page 31