Setup Menu - Emotiva XMC-1 User Manual

setup Menu

Setup
(menu)
Setup | Speakers Menu
The speakers Menu is used to configure your speakers and room correction, including Dirac Live
automatic room correction and manual EQ using the XMC-1's built-in test tones and parametric
equalizers.
Setup | Inputs Menu
The Inputs Menu is used to configure each Input on the XMC-1, including the Input Name and
how the XMC-1 handles various types of input signals on each input
The XMC-1 Menu System
The setup Menu allows you to view and change
Preferences
the main configuration settings for the XMC-1.
(menu)
Setup | Preferences Menu
The preferences Menu is used to configure
various system operating preferences, including
Triggers
Max Volume, Turn-On Volume and Input, and the
(menu)
behavior of the OSD pop up.
Setup | Triggers Menu
HDMI CEC
The Triggers Menu is used to configure the
(menu)
behavior of the XMC-1's four independent
triggers.
Setup | HDMI CEC Menu
Network
(menu)
The hDMI CEC Menu is used to configure how the
XMC-1 participates in sending and receiving CEC
commands.
Advanced
Setup | Network Menu
(menu)
The Network Menu is used to configure various
network parameters for the XMC-1.
Speakers
Setup | Advanced Menu
(menu)
The Advanced Menu allows you to configure
various system operating preferences, including
selecting a Standby Mode, and enabling various
controls and remote control inputs and outputs.
Inputs
(menu)
Firmware updates, and resetting your XMC-1 to
factory defaults, are also initiated from this menu.
Page 40
.