Emotiva XMC-1 User Manual page 65

The XMC-1 Menu System
Speaker Preset
For each Input, you may select to apply any of the three separate speaker/room preset
equalization curves provided by the XMC-1.
The Dirac preset is provided by the Dirac Live automatic room correction system; this curve is
created when the Dirac software is run.
The other two presets (which will be named whatever name you assign to them when you create
them) are created manually using the XMC-1's advanced parametric equalizer banks and controls.
(See the Setup |Speakers and Setup | Speakers EQ sections for details.)
Level Trim
The Level Trim setting allows you to individually adjust the audio level for each Input. This is
typically used to adjust the levels of each input to be similar. The Level Trim can be adjusted to
anywhere between +/- 10 dB in 0.5 dB increments.
Visible
The Visible setting allows you to configure whether each Input appears when you scroll through
the list of available Inputs. By setting Inputs you don't use to NOT Visible, you won't have to scroll
past them when selecting an Input.
Note: The Visible setting only affects whether an Input will be skipped over when you switch
Inputs using the Input Up and Input Down buttons. Even if you set an Input to Not Visible, you
will still be able to access it using a button that you have assigned directly to it.
Page 59