Emotiva XMC-1 User Manual page 27

Hide thumbs Also See for XMC-1:
Table of Contents

Advertisement

Operating the XMC-1
Note: There are several shortcuts that can be used when operating the XMC-1 Tuner from the
front panel. These Tuner shortcuts are accessed by pressing and holding the Tuner Input button
on the front panel while operating additional controls:
To tune stations, turn the Volume knob WhIlE pREssING AND holDING ThE TUNER BUTToN.
To skip to the last/next station, use the Up and Down navigation buttons WhIlE pREssING AND
holDING ThE TUNER BUTToN.
To seek to the last/next station, use the left and Right navigation buttons WhIlE pREssING
AND holDING ThE TUNER BUTToN.
To switch between the AM and fM bands, press the Enter button WhIlE pREssING AND
holDING ThE TUNER BUTToN.
From the remote control: Pressing the Tuner direct input button will select the Tuner as the active
input. Once the Tuner is your selected Input, you can use the direct control buttons on the remote
control to move between stations or radio bands.
The AM/FM Button can be used to switch between the AM and FM radio bands.
The Station Up and Station Down buttons can be used to move directly to the next/last
configured station preset.
The Seek Up and Seek Down buttons can be used to instruct the XMC-1 to seek in the chosen
direction for the next available station with sufficient signal strength to provide acceptable
listening quality.
The Tune Up and Tune Down buttons can be used to instruct the XMC-1 to move up or down to
the next station frequency increment.
Note: The Tune buttons allow you to "manually" shift the frequency up or down to the next
valid location for a station - whether any station is currently broadcasting at that frequency
with sufficient strength for the XMC-1 to tune it or not. This is equivalent to manually turning
a tuning dial, and can be used to configure preset stations that are too weak for the XMC-1 to
detect automatically, or to configure preset stations that are not currently on the air.
Of course, if you prefer, you can operate the XMC-1's Tuner from the remote control using the
Tuner Menu.
Page 21

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents