Selecting A Clip Or An Edl; Playback Operation - Sony XDS-1000 Operation Manual

When the system frequency of clips (59.94i/59.94P/
29.97P, or 50i/50P/25P) matches the system frequency of
the unit, but the number of system line settings (1080 or
720) do not match, then clip playback is cross converted
automatically.
SD up convert function
You can output HD while playing clips recorded as SD.
HD down convert function
You can always output SD while playing clips recorded as
HD.
Pulldown playback
When this unit's system frequency is set to 1080/59.94i,
1080/29.97P, or 720/59.94P, clips recorded as 1080/
23.98P are converted by 2-3 pulldown before playback
(pulldown playback).
Timecode in pulldown playback
During pulldown playback, timecode is also converted to
30-frame timecode to match the output video signals.
The upper row of the time data display area displays the
original 24-frame timecode, and the lower row displays the
30-frame timecode.
TC VITC
00:59:59:23
PDT 00:59:59:29
You can superimpose the 30-frame timecode after
pulldown on an external monitor. To do so, set setup menu
item 005 DISPLAY INFORMATION SELECT to "time
data only".
TCR 00:59:59:23
PDT 00:59:59:29

Selecting a clip or an EDL

DISPLAY button
1
Press the PB PORT button in the basic operation
screen or video monitor screen.
2
Press the INTERNAL button.
3
Press the THUMBNAIL button.
The clip list screen (details view) of the internal
storage appears.
To switch the clip list screen to the thumbnails view
Press the DISPLAY button.
4
Do one of the following to select the clip/EDL that you
want to play.
• Turn the PUSH SET knob.
• Press the arrow buttons.
5
Press the PUSH SET knob.
The selection of the target clip/EDL is confirmed.

Playback operation

This section describes the following types of playback:
Normal playback: Playback at normal speed
Playback in jog mode: Variable-speed playback, with the
speed determined by the speed of turning the jog dial
Playback in shuttle mode: Variable-speed playback, with
the speed determined by the angular position of the
shuttle dial
Playback in variable-speed mode: Variable-speed
playback, with the speed finely determined by the
angular position of the shuttle dial
Normal playback
PREV button
NEXT button
PLAY button
To start playback
Select a clip or an EDL (see page 49), and then press the
PLAY button.
Note
No analog audio signals are output when non-audio signals
are played back.
To jump to the next or previous clip, then start
playback
Use the PREV button or NEXT button.
STOP button
Playback
49