Funkwerk bintec R1200 User Manual page 9

WAN Partner
Field
Compression (cont.)
Calling Line Identification
Table 1-2: WAN P
ARTNER
E offers the following selection options:
NCRYPTION
Description
none (default value)
MPPE 40
MPPE V2 40
MPPE V2 40 (RFC 3078)
Description
■
none (default value)
A combination of encryption and compression
is only possible with (any) MPPE encryption
and MPPC.
When E
NCAPSULATION
Framing, X.25, HDLC Framing (only IP), X31
BChannel, X.25 No Signalling, X.25 PAD, X.25
No Configuration, Frame Relay and X.25 No
Configuration, No Signalling this field is not dis-
played.
(As not all bintec devices support all protocols
and algorithms, please check prior to configura-
tion the availablity of the respective protocol
according to the data sheet at
ec.com.)
Indicates whether calls from this WAN partner
are identified by means of the calling party
number (➤➤ CLID). The value of this field
depends on D
IRECTION
submenu and cannot be set here.
menu fields
Meaning
No encryption
MPPE version 1 and 2 with 40-bit key
MPPE version 2 with 40-bit key
MPPE version 2 with 40-bit key as per RFC
3078: required for MS clients as of Windows
2000 (MS service packs may be necessary,
too)
WAN Partner Menu
= Multi-Protocol HDLC
www.funkwerk-
in the WAN N
UMBERS
bintec User's Guide
1
7