Funkwerk bintec R1200 User Manual page 26

3
Submenu Advanced Settings
Channel-Bundling
Options for
PPPoE connections
24 bintec User's Guide
R3000w Setup Tool
[WAN][EDIT][ADVANCED][EXTIF]: Extended Interface
Optional Extended Interface Settings not configured yet!
Mode
Line Utilization Weighting
Line Utilization Sample (sec)
Gear Up Threshold
Gear Down Threshold
Maximum Number of Dialup Channels
Encryption Key Negotiation
TX Key
RX Key
SAVE
➜
The WAN P A
ARTNER DVANCED
submenu displays options for the function Bandwidth in Demand (=BOD), if
C B is set to dynamic. If BOD is activated in M
HANNEL UNDLING
options are displayed (see screenshot).
The Channel-Bundling function can only be applied with ISDN connections or
leased lines in conjunction with ISDN for increasing bandwidth or as backup so-
lution.
If the remote terminal uses a device of other makes, verify that dynamic channel
bundling resp. BACP/BAP are supported also for leased lines in conjunction
with ISDN for increase of bandwidth resp. as backup solution.
To connect different
L 1 P = PPP over Ethernet (PPPoE) via different Ethernet interfac-
AYER ROTOCOL
es, you can enter a name for the respective service and the required PPPoE
Ethernet Interface in the E
Funkwerk Enterprise Communications GmbH
Settings (branch)
Bandwidth On Demand Enabled
equal
5
90
80
1
static
➜
S E
ETTINGS XTENDED
WAN partners with
I S
XTENDED NTERFACE ETTINGS
MyGateway
CANCEL
I S
NTERFACE ETTINGS
, additional
ODE
➜
A S
DVANCED ETTINGS
menu.
WAN Partner