Funkwerk bintec R1200 User Manual page 34

3
Submenu Advanced Settings
32 bintec User's Guide
Description
BAP, Dialup Client Mode
and
BAP Dialup Server Mode
(cont.)
Backup
Meaning
■
settings on client-side: BAP, Dialup Client
Mode
■
settings on server-side: BAP, dialup Server
Mode (additionally: configuration of further
values as e.g. B N
AP UMBER
in the D P
PPP IAL ROFILE
shell of your gateway)
Channel-Bundling must be activated on both
sides (see WAN P
ARTNER
➜
A S C
DVANCED ETTINGS HANNEL
dynamic or static).
If dial-in authentication is carried out via a
RADIUS-Server, the bintec-specific attributes
must be applied for the configuration of the
RADIUS-Server. Therefore an entry must be
written into the user's file, that generates the
required entries into the
PPP
(For leased lines only)
The backup connection is activated if the
leased line fails. The backup connection is
cleared when the leased line is available again.
BOD is also available for this mode, if a value >
1 is used for M N
AXIMUM UMBER OF
C .
HANNELS
One additional BRI for dial-up connections
must be available at least. See datasheet on
www.funkwerk-ec.com to check with how many
BRIs your gateway is equipped.
and B L T
AP K YPE
T via the SNMP
ABLE
➜ ➜
ADD/EDIT
B set to
UNDLING
E I T .
XT F ABLE
D
IALUP
WAN Partner