Page 2
Liability While every effort has been made to ensure the accuracy of all information in this manual, Funkwerk Enterprise Communications GmbH cannot assume liability to any party for any loss or damage caused by errors or omissions or by statements of any kind in this document and is only liable within the scope of its terms of sale and delivery.
Page 5
PPP Menu PPP Menu The fields of the PPP menu are described below. R232bw Setup Tool Funkwerk Enterprise Communications GmbH [PPP]: PPP Profile Configuration MyGateway Authentication Protocol CHAP + PAP + MS-CHAP Radius Server Authentication inband PPP Link Quality Monitoring...
Page 6
PPP Menu The PPP menu consists of the following fields: Field Description Authentication Protocol Defines the PPP authentication protocols the gateway can use for incoming calls without ➤➤ CLID. Possible values: ■ PAP: PAP only ■ CHAP: CHAP only ■ CHAP + PAP: first CHAP, then PAP ■...
Page 7
PPP Menu Field Description Radius Server Authenti- Settings for RADIUS server authentication. cation (RADIUS = Remote Authentication Dial In User Service). The following authentication sequence is used for incoming calls with RADIUS: first CLID, then CLID with RADIUS, then PPP, followed by PPP with RADIUS.
Page 8
PPP Menu Field Description PPPoE Ethernet Interface Defines the default Ethernet interface for PPPoE connections. WAN partner settings have priority. The default value is disabled. Table 1-1: PPP menu fields bintec User’s Guide...
Page 9
Index: PPP Authentication Negotiation Authentication Protocol Calling party number CHAP 3, 5 CLID Link Quality Monitoring MS-CHAP PPP Link Quality Monitoring PPPoE Ethernet Interface RADIUS Radius Server Authentication bintec User’s Guide...
Need help?
Do you have a question about the bintec R230a and is the answer not in the manual?
Questions and answers