Funkwerk bintec R1200 User Manual page 43

WAN Partner
➜
If in WAN P ADD/EDIT
ARTNER
other options than PPP over PPTP are set, the B
sists of the following fields:
Field
IP Transit Network
Local IP Address
Partner IP Address
Enable NAT
➜
A S
DVANCED ETTINGS
IP-S
ASIC
Description
Defines whether your gateway uses a transit
network to the WAN partner. Possible values:
■
yes: The transit network is used.
■
no (default value): The transit network is not
used.
■
dynamic client: Your gateway receives an
IP address dynamically.
■
dynamic server: Your gateway assigns IP
addresses to the remote gateway dynami-
cally.
Only for IP T N
RANSIT ETWORK
■
if yes = WAN IP address of your gateway
■
if no = LAN IP address of your gateway
Only if yes is set for IP T
RANSIT
WAN partner's WAN IP address in the transit
network.
Only if dynamic client is set for IP T
N . Possible values:
ETWORK
■
yes: NAT is activated for this WAN partner.
■
no (default value): NAT is deactivated for
this WAN partner.
The settings in this menu correspond to NAT
➜
activation in the IP N
ETWORK
➜
T EDIT menu.
RANSLATION
Submenu IP
➜
L 1 P
AYER ROTOCOL
menu con-
ETTINGS
= yes, no.
N .
ETWORK
RANSIT
A
DDRESS
bintec User's Guide 41
5