Funkwerk bintec R1200 User Manual page 38

4
Submenu WAN Numbers
Note
36 bintec User's Guide
➜
The WAN N ADD/EDIT menu consists of the following fields:
UMBERS
Field
Number
Direction
ISDN Ports to Use
Table 4-1: WAN N
UMBERS
When the gateway is connected to a PABX system for which a "0" prefix is nec-
essary for external line access, this "0" must be considered when entering the
access number.
Description
Number of WAN partner.
Defines whether N
UMBER
incoming or outgoing calls or for both. Possible
values:
■
outgoing (default value): For outgoing calls,
where you dial your WAN partner.
■ both (CLID): For incoming and outgoing
calls.
■
incoming (CLID): For incoming calls, where
your WAN partner dials in to your gateway.
The Calling Party Number of the incoming call
is compared with the set N
The Calling Party Number can be read in
M & D
ONITORING EBUGGING
R N .
EMOTE UMBER
Defines the ISDN ports to be used.
■
Slot 0 Auxiliary: no entry or X
■
Slot 2 Unit 0 ISDN S0: no entry or X.
(R3000w)
■
Slot 2 Unit 1 ISDN S0: no entry or X.
(R3000w)
■
Slot 2 ISDN S0: no entry or X. (R3400,
R3800)
menu fields
should be used for
.
UMBER
➜
ISDN M as
ONITOR
WAN Partner